How to use the app

※The content of the labels and the app is subject to change without notice.

Start the app and tap [Start].

Scroll to the bottom of the terms and conditions of use, and tap [Agree].

Allow all access.

Allow camera access

>Required for scanning labels

Allow Bluetooth® access

>Required for communication with washlet unit

Allow motion access

>Required for automatically disconnecting when you leave the toilet

※The procedure may differ, depending on the device and operating system you are using.

Allow motion access

Allow camera access

>Required for scanning labels

Allow Bluetooth® access

>Required for communication with washlet unit

Allow motion access

>Required for automatically disconnecting when you leave the toilet

Allow access to position information
(for Android 11 and earlier)

>Required to allow Bluetooth® access

Tap the [Scan] button on the home screen.

Scan the label.

If the scan screen is not displayed

The remote control screen is displayed.

You can use these functions when you are sitting on the toilet seat.

You can play sound from your smartphone for two minutes.

You can flush the toilet.

※The [FLUSH] button may not be displayed, depending on the toilet you are using.

• The app will disconnect about 30 seconds after you leave the toilet seat.
• If you do not sit down on the toilet seat, the app will disconnect after about 30 seconds.
• The app will disconnect when you leave the toilet.
• The app will disconnect when you close it.
• You can also disconnect by pressing the [STOP] button on the remote control of washlet.
• The app may disconnect if reception is poor.

The quick mode enables you to immediately display the scan screen when the app starts.

Tap the [Setting] tab on the home screen.

Enable the quick mode.

Tap the [Setting] tab on the home screen.

Select the language to set.

This concludes the explanation of how to use the app.

If the following screen is displayed, allow the required functions.
(camera, Bluetooth®, and motion)

For details, see the official website for the smartphone you are using.

If the following screen is displayed, enable Bluetooth®.

Tap here when the settings are complete

If the following screen is displayed, allow the required functions.
(camera, Bluetooth®, position information, and motion)

For details, see the official website for the smartphone you are using.

If the following screen is displayed, enable Bluetooth®.

Tap here when the settings are complete

* Google and Google logo, Google Play and Google Play logo and Android are trademarks or registered trademarks of Google LLC.
* App Store, Apple and Apple logo are trademarks of Apple Inc. registered in the U.S. and other countries.
* iOS is the name of the operating system of Apple Inc.
* IOS is a registered trademark or trademark of Cisco Systems, Inc. or its affiliates in the U.S. and other countries and is used under a license.
* iPhone is a trademark of Apple Inc.
*The Bluetooth® logo is a registered trademark of Bluetooth SIG, Inc. and is used by TOTO under license.